| ADMSTAT
Plus™ |
ARC
DATA MONITOR STATISTICAL ANALYSIS PROGRAM |
Computer
Weld Technology’s Windows® based ADMSTAT Plus™ program
was designed and developed specifically for use with the ADM IV™
Arc Data Monitor. ADMSTAT Plus™ is compatible with Windows®
98/ME/NT/2000/XP operating systems. The real-time collection and display
of the welding data is accomplished using the proprietary high-speed
serial communication protocol with the ADM IV™. Single and
multiple welds can be gathered, arranged and identified by weld
schedule using the appropriate weld collect mode and by employing
the graph functions, the user can view and analyze the stored welding
data. Also provided is an ASCII terminal program used to configure
or query the current status of a specific value, mode or function
of the ADM IV™. |
| |
| |
| Simultaneously
collect and Display Real-Time Sweep Graph of Weld Data |
| The
statistical function allows the user to calculate basic process control
limits for a specific weld schedule based on the stored weld data,
edit those calculated limits as required and down load them to the
ADM IV™. |
| |
| |
| Weld
Schedule Edit Windows |
|
Other
features included are a weld setup specification sheet used to record
specific operational and process data for the current weld schedule,
and the graph function which provides the capability to easily review
and export the archived weld data |
| |
| |
| Fault
Data Display |
| The
Fault Data Display allows the user to display stored weld data which
indicates the date, time, weld number, schedule and faulted data for
each fault condition detected. Easily scroll through all fault summaries
and display status for each enabled parameters. The summaries can
be printed to provided a hard copy of the faulted welds. |
| |
|
|
| FEATURES |
- "Pull-down"menu
screens
- Tool
Bar "Speed Buttons"
- Control
Bar "Command Buttons"
- Real
time on screen sweep graphs, displayed simultaneously, for
up to four user definable parameters
- Graph
"Zoom" capability during data collection or data
review phase
- Can
be interfaced with customer supplied software
- ASCII
terminal program
- Graphical
and statistical analysis of stored weld data
- Multiple
weld schedule identification
- Calculate,
display, edit and store Arc Data Monitor limits
- Specific
user definable "Fault Messages"
- ASCII
data exporting capability
|
|
| SYSTEM
REQUIREMENTS |
- 150mhz
Pentium™ or higher microprocessor
- Windows®98/ME/2000/XP
or Windows NT® 3.51 or later platforms
- 24
Megs minimum for Windows® 98/ME, 32 Megs for Windows® NT/2000/XP
- 25
Megs of available hard drive space
- Minimum
SVGA graphics, XVGA recommended
- RS-232
serial port
|
|
| |
| |
|
