| DMC-1000™
DC Motor Controller |
- The
DC Motor Controller 1000 is a microprocessor based Direct
Current Motor Controller designed to operate with Computer
Weld Technology's WSC-1000™ Weld Sequence Controller.
The DC Motor Controller can be used to interface direct
current motor driven components such as wire feed and travel
with the appropriate mechanical and electrical specifications
to the WSC-1000.
- When
used with the Weld Sequence Controller, the DMC-1000 receives
position, velocity and speed command data from the WSC-1000
by means of a Local Area Network (LAN) making the unit convenient
and easy to install and simple to use.
- The
internal 75 line Programmable Logic Controller (PLC) enables
the user to configure the system to comply with the desired
operational sequences. Computer Weld Technology's DMC-1000
DC Motor Controller can be used as a stand-alone control,
when programmed directly from a personal computer or terminal,
and has the capability of storing up to 75 PLC commands.
|
|
MECHANICAL
SPECIFICATIONS
|
| Dimensions |
2.0"
High 8.5" Wide 11" Long (51mm H x 165mm W x 280mm L) |
| Mounting
Dimensions |
7.5"
Wide 8.50" Long (4 each 10-32 blind hole fasteners) |
| Weight |
5
lbs. (2.27kg) |
| Operating
Temperature |
-10°F
to +140°F (-23°C to +60°C) |
|
ELECTRICAL
SPECIFICATIONS
|
| Power
Input |
120
vdc ±10% @ 5.0 amps |
| Armature
Current |
0.5
- 3.0 amps |
| Armature
Voltage |
0
- 100 vdc |
| Field
Current |
2.0
amps maximum |
| Field
Voltage |
110
vdc nominal |
Encoder
Input |
5
vdc or 15 vdc optical encoder 60 lines / rpm max frequency
input: 3.0 Khz |
PLC
Inputs |
24
vdc @ 20ma (active high) |
Relay
Outputs |
Dry
relay contact (normally open) 115 vac @ 0.5 amps |
CW/CCW
Limit Input |
5
- 36 vdc @ 5ma (active high) |
|
| |
Mounting
and Installation Dimenisions |
 |
|
|
| |
| FEATURES |
- 75
Line PLC
- Compact/lightweight
design
- RS-232-C
Serial Port or LAN connection
- Operates
on Computer Weld Technology's LAN system
- Flexible
design
- Automatic
motor calibration
|
|
| BENEFITS |
- Permits
user configuration of operational sequences
- Usable
in confined areas
- Permits
off-line programming, system configuration and remote control
- Provides
expanded operational capability
- Can
be interfaced with other manufacturer's equipment
- Facilitates
ease of installation and operation
|
|
|
