| |
MOTOR
CONTROL SYSTEMS |
| |
MSC-1000™
Micro-Step Controller |
 |
- Micro-Step
Controller is a microprocessor based Stepper Motor Controller
designed to operate with Computer Weld Technology's HSA-2000™
and/or VSA-2000™ precision slide assemblies. The "Micro-Step
Controller" can be used to interface other stepper motor
driven components, and with the appropriate mechanical and electrical
specifications, to the WSC-1000™ Weld Sequence Control.
- When
used with the "Weld Sequence Control" the MSC-1000 receives
position and velocity command data from the WSC-1000 by means
of a Local Area Network (LAN), making the unit convenient and
easy to install and simple to use.Computer Weld.
- Technology's
"Micro-Step Controller" can be used as a stand alone
control, when programmed directly from a personal computer or
terminal, and has the ability to store up to 50 move and/or velocity
commands.
|
|
| |
DMC-500™
DC Motor Controller |
 |
- The
DC Motor Controller 500 is a SCR motor speed controller using
an embedded micro controller to provide motor speed regulation
and torque compensation. The controller can be used to control
permanent magnet (PM) or shunt wound field motors up to ¼
hp and is designed to be used with the WSC-1000™ Weld Sequence
Controller to control linear DC drive motors for wire feed and
or travel speed functions.
- The
DMC-500 provides speed and torque regulation using an optical
encoder or phase sampled Back EMF. The embedded controller provides
precise motor braking and anti-plugging features to extend motor
life. Computer Weld Technology's DMC-500 DC Motor Controller can
be used as a stand-alone control, or with the WSC-1000 Thru-Arc
System providing motor control functions for DC motors from 1/10
hp to 1/4 hp.
|
|
| |
DMC-1000™
DC Motor Controller |
 |
- The
DC Motor Controller 1000 is a microprocessor based Direct Current
Motor Controller designed to operate with Computer Weld Technology's
WSC-1000™ Weld Sequence Controller. The DC Motor Controller
can be used to interface direct current motor driven components
such as wire feed and travel with the appropriate mechanical and
electrical specifications to the WSC-1000.
- When
used with the Weld Sequence Controller, the DMC-1000 receives
position, velocity and speed command data from the WSC-1000 by
means of a Local Area Network (LAN) making the unit convenient
and easy to install and simple to use.
- The
internal 75 line Programmable Logic Controller (PLC) enables the
user to configure the system to comply with the desired operational
sequences. Computer Weld Technology's DMC-1000 DC Motor Controller
can be used as a stand-alone control, when programmed directly
from a personal computer or terminal, and has the capability of
storing up to 75 PLC commands.
|
|
| |
