Series 2000 Horizontal Slides

HSA-2000™ Horizontal Slide Assembly
  • Computer Weld Technology's Hprizontal Slide Assembly is a precision linear motor control device that provides exacting horizontal movement for cross-seam positioning and/or torch oscillation. The slide assembly is intended to be used with Computer Weld Technology's MSC-1000 Micro-step Controller which provides the necessary control functions and drive power to the stepper motor drive.
  • The high strength timing belt direct drive design provides smooth operation and superior response. The ability to change direction rapidly, its compact lightweight design and excellent repeatability, makes the HSA-2000 an ideal tool for use with automatic systems and automated welding applications.
  • The user can regulate the slide center position, stroke width, oscillation speed, left and right dwell times and enable automatic centering for the purpose of centerline weld joint tracking for all welding processes when used only with the MSC-1000 control.

DOWNLOADS
FEATURES
  • Accurate positioning
  • Compact, lightweight design
  • Stepper motor drive
  • Timing belt driven
  • Precision Ball Rail System
  • Automatic power down brake
BENEFITS
  • Provides repeatability for critical applications
  • Usable in confined areas for multiple applications
  • Provides rapid direction change and smooth, quiet operation
  • Provides long life and low maintenance cost
  • Assures slide does not move when power is removed

MECHANICAL SPECIFICATIONS
Load Capacity 35 lbs. [15.88kg), 6.00" (15.24cm) from slide face
Slide Weight See table below
Stroke Length 3.00" (7.62 cm), 8.00" (20.32 cm), 12.00" (30.48 cm)
Oscillation Width 0.01" (0.03 cm) to maximum slide length
Travel Velocity 0.05" (0.13 cm) to 6.00" (15.24 cm)/second
Left/Right Dwell 0.01" to 9.99 seconds
Position Resolution 0.001" (0.003 cm)
Position Accuracy 0.004" (0.01 cm)
Operating Temperature Range -30° F (-34° C) to 150° F (65° C)
Brake System Automatic power down brake

DIMENSIONS AND WEIGHTS

DESCRIPTION
SLIDE LENGTH
DIM "A"
DIM "B"
SLIDE WEIGHT
HSA-2003
3.00" (7.62 cm)
11.67" (29.64 cm)
6.40" (16.26 cm)
10.00 lbs. (4.54 kg)
HSA-2008
8.00" (20.32 cm)
16.39" (41.63 cm)
8.77" (22.28 cm)
12.00 lbs. (5.44 kg)
HSA-2012
12.00" (30.48 cm)
21.11" ( 53.62 cm)
11.13" (28.27 cm)
16.00 lbs. (7.26 kg)
 
NOTE: Specifications are subject to change without notice.
©1994-2005 Computer Weld Technology, Inc. All rights reserved.
10702 Old Bammel N Houston Rd. • Houston, TX 77086 • Phone (713) 462-2118 • Fax (713) 462-2503