| WOC-500™
Weld Oscillator Controller |
- The
Weld Oscillator Control System from Computer Weld Technology
is designed to offer affordable and compact weld torch manipulation.
It is a pendulum type, stepper motor driven oscillator that
provides state-of-the-art independant control of all torch
movements in the horizontal plane.
- The
WOC-500 provides the capacity to control Centerline Position,
Oscillation width, Oscillation Velocity, and Left and Right
Dwell. The system supplies the user with an easily accessible
external interface for remote control functions.
|
|
| |
- The
WOC-50O provides a user definable 50 sequence Programmable
Logic Controller (PLC) with four 24 vdc inputs and two N.O.
relay contacts. Using the PLC the user can provide external
program control and simple power source interface. The RS-232
serial port is provided for off-line programming and system
configuration and can also be used to remotely control the
WOC-50O.
- The
Weld Oscillator Control provides the necessary command signals
to the stepper motor powered drive to permit the selection
of the following functions from the front panel of the oscillator
control box.
|
| Front
Panel
- ON/OFF
- Jog
(CW & CCW)
- Oscillation
Width
- Oscillation
Velocity
- Dwell
(Left & Right)
|
Remote
- ON/OFF
- Jog
(CW & CCW)
- Control
Reset
|
- Employing
the external interface permits remote control of the oscillator
functions and gives convenient, electronic access to peripheral
equipment.
- The
second component is the pendulum type oscillator that is
driven by a stepper motor which provides high reliability
and low maintenance costs. The oscillator can be installed
in-line or at 90 degrees and because of the compact configuration,
is usable in confined spaces.
|
|
WOC-500
- WELD OSCILLATOR CONTROLLER - MECHANICAL SPECIFICATIONS
|
| Dimensions |
6.625"H
X 4.125"W X 8.75"L (1 68mm X 105mm X 222mm) |
| Weight |
5.5
lbs (2.5kg) |
| Power
Requirements |
115
vac or 42 vac 50/60 Hz @ 200 va |
| Dwell
Time |
0.02
to 2.0 seconds (left and right) |
| Velocity |
0.240
to 60° / seconds |
Width |
±0.060
to 15° |
|
PENDULUM
OSCILLATOR - MECHANICAL SPECIFICATIONS
|
| Dimensions |
4.687"H
X 2.375"W X 4.5"L (119mm X 60.5mm X 114.3mm) |
| Weight |
3.5
lbs. (1.6kg) |
|
|
 |
|
| FEATURES |
- RS-232-C
Serial Port
- Accurate
positioning
- Stepper
motor driven
- External
interface capability
- Compact
lightweight design
- Convenient
flexible mounting
|
|
| BENEFITS |
- Permits
off-line programming, system configuration and remote control
- Provides
repeatable positioning for critical applications
- Low
maintenance cost
- Permits
remote control of oscillator and easy interface with peripheral
devices
- Usable
in confined areas
- Can
be mounted in-line or at 90 degrees
|
|
|
