 |
WOC-500™ |
- The
Weld Oscillator Control 500 System from Computer Weld Technology
is designed to offer affordable and compact weld torch manipulation.
It is a pendulum type, stepper motor driven oscillator that provides
state-of-the-art independant control of all torch movements in
the horizontal plane.
- The
WOC-500 provides the capacity to control Centerline Position,
Oscillation width, Oscillation Velocity, and Left and Right Dwell.
The system supplies the user with an easily accessible external
interface for remote control functions.
|
|
 |
WOC-1000™ |
- The
Weld Oscillator Control 1000 System is a compact, lightweight,
weld torch manipulation control system comprised of the micro-controller
based Weld Oscillator Control and a stepper motor driven Pendulum
Oscillator Assembly.
- This
system is capable of providing independant control of all torch
movements in the horizontal plane. Employing patented "Thru-Arc"
tracking technology, the system provides automatic torch centering
and width control.
- The
WOC-1000 provides automatic torch centering and four modes of
operation. Constant width oscillation with automatic torch centering,
variable width and centerline control using a depth of penetration
parameter to control the width, single right side tracking with
constant width and single left side tracking with constant width.
- All
of the seam tracking information is derived from the welding arc
and oscillator position.
|
|
