ArcTrack II  
Arc Data Logger  
Statistical Analysis Program  
   
The ArcTrack II™ Program provides a GUI for Computer Weld Technology's sensors using a ModBus RTU protocol. Our program is designed to use the various CWT Weld data sensors and provides advance data logging function.   
 
 
  • Description
  • Features
 

The ArcTrack II program is designed to use the various CWT Weld data sensors and provides advance data logging function. It is designed to provide a simple GUI interface for weld data logging for manual weld procedure development and documentation. It provides a Sweep chart option to graphically monitor and collect welding data from remote CWT Sensors. It provides both run time and summary data files that can be directly imported into Microsoft Excel for further evaluation. This program can be used with the following CWT sensors; Micro ADM, Intella-DART, WireTrak, Smart Sensor, GFM and the WDL III.

The sensor provides fault testing of the basic welding parameters (i.e. Volts, Amps, Wire Speed, Gas Pressure and Arc Time). It incorporates an advanced testing algorithm that provides three levels of fault testing. The sensor provides in-process parameter limit testing, Arc Density (AAD) for each weld in a Part and an ADD, Weld Count and Volume Applied test for each Part.

The sensor also features a Part Learn Mode that allows the sensor to establish statistical control limits based on actual production parts. The ArcTrack II™ program allows the user to upload run time weld data and stored SPC weld summary data.

It also allows the user to graphically analyze the stored data and to view the internal sensor parameters and configure the basic sensor parameters. The Weld Data Panel allows the user to display run time data using a Mufti axis graphical chart. Up to five parameters can be displayed with individual scaling.

 

"Pull-down"menu screens

Tool Bar "Speed Buttons"
Control Bar "Command Buttons"
Real time on screen sweep graphs, displayed simultaneously, for up to five user definable parameters
Graph "Zoom" capability during data collection or data review phase
Graphical and statistical analysis of stored weld data
Calculate, display, edit and store limits
   
 
 
 
Product Specifications

 

 

 

  • System Requirements
 
Required Processor 150mhz Pentium™ or higher microprocessor
Required Operating System Windows® XP Service Pack 2 or later platforms
Required Memory 24 MB minimum
Required Hard Drive Space 25 MB of available hard drive space
Required Display Minimum SVGA graphics, XVGA recommended
Required Communications RS-232 serial port
 
 
 
 
Please disable browser pop-up blockers for documents on cweldtech.com to allow PDF files.
 
Note - All documents are in an Adobe PDF file format.
 

 

 

Copyright 1994-2018 Computer Weld Technology - A Lincoln Electric Brand - All rights reserved.
10702 Old Bammel N. Houston Road, Houston, TX 77086 USA - Phone: 713-462-2118 - Fax: 713-462-2503