• Description
  • Features
  • Benefits
 

The UWC™ Universal Weld Control from Computer Weld Technology can bring total weld process control to your system. Based on an embedded micro controller, this unit provides two 0-10 VDC programmable outputs, one to control the welding power source and the second, a CWT Capstan Wire Feed Motor PWM Drive Control. Also provided are 50 user selectable weld schedules 256x64 pixle graphical LCD display for programming the weld schedule data and to configure the control options. The controller can be easily interfaced to your application and can provide state-of-the-art control of your welding process with a simplicity that is hard to find elsewhere.

With 50 programmable weld schedules, the UWC™ provides total flexibility in your welding environment. This controller can be used to standardize the integration for all weld processes. The UWC™ can be used with GTAW, GMAW, SAW or PAW weld processes. The controller can be programmed directly from its front panel or use the EZ-Edit Plus™ for off-line programming.

Whether new or old, UWC™ brings total weld process control to your system. The control provides a standardized interface for all welding systems. It can be used to control GMAW, SAW, PAW and GTAW welding systems. The control will interface to most all solid state welding power sources and wire feed drives. The optional PWM motor drive can be provided that will control most wire drive motors. The control provides a simple user definable Max/Min scaling to calibrate the external power source output and wire drive speed range.

 
Up to three isolated analog 0-10 vdc outputs and eight solid-state isolated relay outputs
Five 24 vdc optically isolated inputs
128 x64 pixel graphic LCD display for easy programming of welding parameters
Optional EZ-Edit Plus™ RS-232 Terminal Program for off-line programming

 

 
Provides simple interface to solid state power supplies and wire drive controls
Allows remote user interface and weld schedule selection and provides remote control of the run time amp/volt or wire speed parameters
Provides off-line weld schedule development and system configuration
Provides a standardized user interface with easy to use menu driven display and fault status messages
Indicates operations and I/O status

 

 
 
 
Product Specifications

 

 

 

  • General
 
Dimensions 8.00" H X 10.50" W X 4.60" D (203mm X 267mm X 117mm)
Power Requirements 110/240 vac 50/60 Hz @ 4 amps
Operating Temperature -10° F to +140° F (-23° C to +60° C)
Relay Outputs 24 vdc @ 1 amp normally open contacts
Switch Inputs 5-24 vdc @ 1.0-8.0 ma
Analog Inputs 10-vdc precision reference output. 10-bit resolution (10 mv resolution). Maximum output current 10 ma. Output is short circuit protected.
Encoder Input Pulse accumulator input 5.0 vdc TTL level with 4.7K pull-up. Maximum input frequency 15 khz.
 
 
 
 
Please disable browser pop-up blockers for documents on cweldtech.com to allow PDF files.
 
Note - All documents are in an Adobe PDF file format.
 
Press to enter download area for Autocad DXF drawing format.

 

 

Copyright 1994-2018 Computer Weld Technology - A Lincoln Electric Brand - All rights reserved.
10702 Old Bammel N. Houston Road, Houston, TX 77086 USA - Phone: 713-462-2118 - Fax: 713-462-2503